For anyone who is planning to redo the look of their basement, there are plenty of great basement remodel ideas to pick from. Not only will you be creating a more livable space in your home, but you’ll also be taking up less floor space. It can be a lot cheaper than you think when you go ahead and do the work yourself.
Great Basement Remodel Ideas
First thing that you need to figure out is what you want to use for a ceiling in your basement. You might think that a ceiling will provide a way to add sound insulation, but this is not the case. Ceilings provide a solid surface for your walls, but they do not provide much sound insulation at all. Consider the various types of sound insulation for your basement. For example, install an acoustic paneling between your wall studs or install a soundproof screen.
When you decide on what to use as a ceiling, you should also consider using a subfloor under the crawl space. This will help keep it dry so that it is easier to keep your basement free of moisture. Also, make sure that the walls and ceilings are nailed or screwed to the subfloor properly.
Walls for a basement are going to consist of nothing but plywood, which is an excellent choice for a cold draft proofing wall. What you need to do is lay a large sheet of plywood down, like a two by four or a two by six. Screw the edges together with hardware cloth and then put a panel over top to cover the raw edges. Do this for each wall in your basement.
The same goes for your ceiling. You’re going to use the same kind of panel for your ceiling that you did for the walls. You need to put the plywood panels on top of each other, cut the end where it curves into a U, and then nail it down. After that, you need to turn your ceiling down and you’re done!
Now, we need to talk about the subfloor and how it is going to be used for insulation, sound control, and moisture control. What you’re going to want to do is run the underlayment over the subflooring for best results. Then you want to lay a subfloor with waterproof membrane on top and secure it to the subfloor with hardware cloth. You don’t want to install the subfloor on its own, you want to lay the actual wood boards first and then the subfloor.
The subfloor only need to be saturated once a year with water. All you have to do is turn the sprinkler on and spray the water on the subfloor for one hour each day. This will saturate the subfloor and then you can re-flush the whole room. Don’t forget to get rid of the debris as well.
These are the three most important basement remodel ideas. They should help you get started on your new basement.